Ceramic Tile Patterns

Posted By admin on January 25, 2010

ceramic tile floor installation

A common question is laying tile, Can I put ceramic tile on existing ceramic tiles in my kitchen / bathroom. Well, the answer to that question yes and no. I do not feel it's the best way to install ceramic tile, but you can do. Everything depends on the condition of the existing floor tiles.

You'll have to ask yourself, is my existing tiles in good condition? Ceramic tiles need a good adhesion to material underneath. If your current floor is still adhering to the basement and no hollow sounds (lack of thinset below) then you could set the new ceramic tile on top. You want to make sure Current floor is clean before proceeding. Use a clean scrub brush to remove grease and dirt before attempting to lay the ceramic tile. After to clean the tile you want to try to scrape the existing tile and grout. This will help the mortar adhere to the new tile age. Adding tiles on top an existing plant will increase its floor level so you probably will have to cut the door jams. You can move the raised floor in the transition zones by the Buying a new threshold plate.

If you decide to remove the existing ceramic piece with care. The first tool is that you need to get glasses security. This will help avoid waste in the eyes. Removing the tile will be different depending on the subsoil. If you have a wood subfloor and the tile installed above was placed on the base plate of cement consider yourself lucky. This seems easier than the removal of tile installed in concrete. Do not try to save the plate base, just start removing some tile with a wide, flat chisel and a hammer. Once you outline some of the base plates to try this lever and the tile together. I found it easier to remove the base plate and replace it with new material.

I hope this article help solve this common question, "Can I put ceramic tile over an existing tile floor. "Remember to take your time during floor preparation.

Installing ceramic tile. How to install channel L edge of the floor before the addition of thin?